Welcome to visit shandong zhongtaitongze machinery co., LTD. !

Shandong mosen machinery co., LTD.

service phone :18265607258

CONTACT

shandong zhongtaitongze machinery co., LTD.

Phone:0536-6188269

TEL:18265607258(Manager yu)

Website:www.sdzttz.cn

Address:Shandong zhucheng Michigan east road no. 7800

The use of the sterilization pot, maintenance and maintenance

Source: Time:2018-12-07 15:54:58 views:

Production technology of 1, users should according to its sterilization conditions and the sterilization pot's technical performance for sterilization pot safety operational procedures, and strictly implemented.

Production technology of 1, users should according to its sterilization conditions and the sterilization pot's technical performance for sterilization pot safety operational procedures, and strictly implemented. Sterilization pot safety procedures should include at least:

2, operation process index of the sterilization pot and working pressure, working temperature.

3, sterilization pot's operation methods and procedures and matters needing attention.

4, the production should check mainly in the operation of the project and parts, and that may occur in the operation of the abnormal phenomenon and prevention measures.

5, when equipment downtime and maintenance methods.

6, use sterilization pot operator shall be qualified through training examination, should strictly abide by rules of safe operation and post responsibility system; Found abnormal phenomenon should be handled in time.

7, sterilization pot hold safety valve, pressure gauge, thermometer, such as accessories, to keep safety, complete, sensitive and reliable. In use process should add maintenance and check regularly. This equipment safety valve and pressure is equal to the design pressure, should maintain a sensitive, reliable, should prevent adjusted freely. Pressure gauge, thermometer, precision grade of 1.5, within the tolerance allowed differences is normal. No seal pressure gauges shall not be used, gauge indicates failure, scale is not clear, the dial is broken, and pointer back to zero, after pressure seal damage, and so on and so forth should be replaced immediately. Thermometer should conduct regular inspection, before use should be in a standard thermometer calibration is, nuclear is once a year, after mercury fracture and differ with normal temperature more than 0.5 ℃ should be repairing or replacement.

8, sterilization pot should be checked regularly, at least once every six months the external examination, a thorough inspection every year at least, the preparing work before test and inspection items, and shall, in accordance with the relevant provisions of the "regulations" and inspection report filed for the record.

9, in use process should often to bevel self-locking wedge, roller, pan ear, swivel flange, such as sliding and rolling contact parts, daub grease and oil, to ensure that the friction surfaces in the lubrication state.

10, equipment downtime, sterilization pot and a pot of inside and outside surface should be clean. Exposed brush to paint processing, safety monitoring control instrument shall cover sealing protection.